Xtreme® Mulching Kit for 42-inch Cutting Decks
Article
19A30046100
From
92,65 $
MSRP
Xtreme® Mulching Kit for 42-inch Cutting Decks
Article
19A30046100
From
92,65 $
MSRP
En stock
Avez-vous un numéro de modèle?
- Fits most XT1, XT2 and RZT Models with a 42-inch Cutting Deck
- Includes two Xtreme® mulching blades, molded plug, mounting hardware and instructions
- Ideal for finely cutting grass clippings and redistributing them back into your lawn, providing essential nutrients
Disponibilité:
Livraison dans
9 à 11 jours
Prise de livraison dans
7 à 9 jours
Expédition à l’adresse indiquée dans
8-10 days
Disponibilité:
Livraison dans
9 à 11 jours
Prise de livraison dans
7 à 9 jours
Expédition à l’adresse indiquée dans
8-10 days
Caractéristiques et pièces
Lame
- Center Hole Pattern S
- Blade Category Xtreme
- Type de lame 2-in-1
- Largeur de coupe 42 in
Caractéristiques de l’accessoire
- Pour les gammes Ultima Series™ ZT XT1/XT2 Enduro Series
Magasiner en toute confiance
Cub Cadet s’engage à expédier les bonnes pièces : achetez vos pièces et accessoires en toute tranquillité. Si vous achetez une pièce qu’il ne vous fallait pas de Cub Cadet ou d’un revendeur agréé en ligne, Cub Cadet ou votre revendeur agréé en ligne vous aidera à trouver la bonne pièce et effectuera un échange gratuit. Veuillez consulter les conditions..
Livraison rapide et gratuite
Les commandes de pièces de plus de 50 $ sont livrées gratuitement.* Le délai de livraison standard est de trois (3) jours ouvrables en moyenne
*Certaines restrictions s'appliquent. Consulter les conditions de livraison.
Retours sans soucis
Nous vous enverrons la bonne pièce. Les pièces qui n’ont pas été utilisées peuvent être retournées dans un délai de 30 jours. Il n’y a aucune pénalité lorsque vous n’avez pas commandé la bonne pièce et vous avez suivi notre politique de retour.*
*Certaines restrictions s'appliquent. Consulter les conditions de livraison.
Clavardage avec les experts
En un clic, vous pouvez clavarder avec nos experts sur les équipements motorisés de pelouse et de jardin. Clavardage disponible du lundi au vendredi, de 8h00 à 17h00.
Assistance téléphonique :
1-800-668-1238
Commentaires d'utilisateurs
Rated 4 de
5
de
Just Saying par
Plug the holes
[This review was collected as part of a promotion.] The mower mulches great with this unit. However, as stated in many other reviews it blows clippings up and into your face. The issue is that once you remove the standard clipping chute, the two holes remain uncovered allowing clippings to shoot rihtgt up into your face. This can be corrected by placing some high strength duct tape over the holes left by removing the original chute. Although, it would be nice if Cub Cadet could produce some rubber plugs to fill these holes and provide them with the mulching kit. Even better, also send a set of the plugs to owners who have already purchased the mulching kit (Free of Charge).
Date de publication: 2023-02-06
Rated 4 de
5
de
TRBYNE par
Mulch Kit Only
Okay, I gave the mulch kit a 4 star since it works fine except for the cover which is too thin/flexible and deflects when mowing. This permits a build up of trapped grass clippings (in the space between the cover edge and the deck edge )which have to be pulled out by hand.
Date de publication: 2022-05-05
Rated 1 de
5
de
Chad A par
Mulch Kit
The mulching blades are sufficient. However the plastic piece to cover the outlet is insufficient. Grass blows out through the sides and around it because it does not approximate sufficiently to the deck. And therefore, the grass does not get recirculated to be cut into smaller pieces
Date de publication: 2022-10-14
Rated 2 de
5
de
Timmy Jr par
Good except for the mulch plug
I had high hopes for an easy install for this kit. For the most part, the deck came off with only a slight struggle, the 15/16 nuts came off after some serious muscle (and maybe a hammer), and the blades slid right into place. Much better and hopefully sharper than what I had on there. The mulch plug that's another story. No way was that designed for my mower. It should fit but I literally had to pull the plastic so it stretched in order to get it on. I just can't believe it took so much effort and it still doesn't sit properly on the mower. It will do and will look to replace it when I have to change the blades again (if it lasts).
Date de publication: 2022-05-01
Rated 4 de
5
de
Sam Graynamore par
nice blades, okay plug
[This review was collected as part of a promotion.] bought this skeptical of how well it would perform given mostly negative reviews on the plug piece. a metal piece would have probably have a little more "stoutness" to it but I don't think it's nearly as bad as what people say or maybe I just got lucky on my application. clippings still kind of blow all around the edge of the deck so while I'm not shooting clippings 6' off to the side I still get clippings blowing into the flower beds. that said blades work great I hardly get any kind of clumping even in in heavy cutting. curious how it'll perform in the fall with leaves but that's still a ways away
Date de publication: 2023-10-10
Rated 1 de
5
de
Josh from Ohio par
Poor design
[This review was collected as part of a promotion.] The deck plug/cover is of a very poor design. No matter how many times you tighten it down the plug will work it’s way loose and spit grass all over the yard. I was shocked at how poorly this was designed and the operational value is a complete failure. You have to remove the side discharge chute by removing the assembly bolt and install the mulching cover, which does very little to actually block the chute opening and mulch the clippings.
Date de publication: 2023-05-08
Rated 2 de
5
de
AE22 par
Deck plug is a poor fit
Leaks clumps of grass all over the yard because the plug doesn't seal very well.
Date de publication: 2022-05-10
Rated 2 de
5
de
Redesign par
Poorly designed deck cover
I got the mulching kit primarily so that the grass wasn’t being sprayed out the side, however after using it just once I’m not very impressed. While it reduces the grass spraying out the side the grass gets clogged and forces the plastic cover on the mower deck up enough to slightly spray out the side. While having new blades on the mower is helpful the plastic cover for the mower deck is poorly designed. In order for this concept to work the cover would need to be made out of metal and bolted on. I may try to manufacture my own piece of metal but I wish I had done that rather than buy this cheap piece of plastic.
Date de publication: 2022-06-05