Changing Gas on a Cub Cadet Walk-Behind Mower

Length of clip: 01:00

This video will show you how to change the gas on a Cub Cadet walk-behind mower.  Depending on your model, the instructions in this video may vary slightly.  Always be sure to check your operator's manual for detailed instructions.

Instructions

Step 1

Remove the spark plug ignition wire.

Step 2

Unscrew the gas cap.

Step 3

Using the Arnold Siphon Pump, place the orange tube into the gas tank on the engine and the black tube into a proper container.

Step 4

Prime the pump by pumping the handle three or four times.  Once the liquid begins to flow, it will continue flowing without further pumping.

Step 5

Remove the Arnold Siphon Pump and add new gas.

Step 6

Replace the gas cap.

Step 7

Reconnect the spark plug ignition wire.

Step 8

Dispose of the gas properly.