PRO X 660
COMMERCIAL STAND-ON MOWER
Item#:
53RI8CSU050
From
$ 17,399.00
MSRP
PRO X 660
COMMERCIAL STAND-ON MOWER
Item#:
53RI8CSU050
The Cub Cadet® PRO X 660 60-in. 25.5 HP* Commercial Stand-On Lawn Mower features a fully fabricated 10-gauge steel commercial deck shell with top, bottom and side reinforcements. Standard 24-in. tires are designed to give you ground clearance to easily hop on curbs. A large, fully adjustable suspension platform is engineered to allow you to glide comfortably through tough terrains.
Documents and Guides
- Commercial-grade 25.5 hp Kawasaki® FX801V (852cc) engine
- A fully fabricated 60-inch 10-gauge steel commercial deck shell with top bottom and side reinforcements plus standard 24" tires give you more ground clearance to easily hop on curbs.
- A large, fully adjustable suspension platform allows you to adjust tension and glide comfortably through tough terrains.
- High-performance commercial Hydro-Gear® PK 12cc pumps & Parker® TL 240cc wheel motors deliver quick response to the drive wheels and smooth control for cutting speeds up to 10 mph.
You're shopping available inventory from
Attachments & Accessories
Ship to Home Available
Ship to Home Available
PRO X 660 Features
Specs & Maintenance
Engine
- Engine Brand Kawasaki®
- Engine Model FX Series
- Engine Model Number 801V
- Engine Displacement 852cc
- Engine Output 25.5HP
- Starter Type Electronic
- Fuel Tank Capacity 7.5 gal. US (28.4 L)
- Cylinders Twin
- Engine Start Ignition Key
- Engine Oil Capacity 2.0 qt. US (1.89 L)
- Lubrication Fully pressurized
- Charging System 15 amp regulated
- Fuel Gauge No
- Choke Separate Choke
- Air Filter High Density
- Oil Filter Yes
- Fuel Delivery Carburetor
Drive System
- Transmission 12cc Hydro-Gear® pumps / 240cc Parker® wheel motors
- Forward Speed 10 mph / 16 km/h
- Reverse Speed 5 mph / 8 km/h
Cutting Deck
- Deck Cutting Width 60 in
- Deck Material 10-gauge steel
- Deck Engagement (PTO) Electronic with quick reset
- Deck Construction 10 ga shell w/ 7 ga top & bottom reinforcement
- Spindle Construction HD 8" aluminum housing, 35mm double-row sealed ball bearings, 1-3/8" through-shaft and maintenance-free design
- Blade(s) Three 21" long high-lift Marbain blades, 1-1/2" of blade overlap
- Deck Lift Hand lever adjusting spring lift, pin selector for height
- Cutting Height Range 1.5”- 4.5”
- Anti-Scalping 2 front deck gauge wheels
Chassis
- Frame 2" x 3" full-length tube frame
- Front Axle 2" x 3" tube construction
- Front Caster Mount 3/8" thick steel
- Suspension Hand lever adjust, 3-position spring suspension foot platform
Controls
- Cruise Control NA
- Brakes Hand lever control / external band
- Steering Control Lap Bar Steering Wheel Control
Wheels
- Rear Tires 24"x12"-12"
- Front Tires 13x5-6" Reliance Run Flat carlisle
Dimensions
- Dimensions L/W/H 69" / 74" / 62"
- Weight (approx.) 1115 lbs
Additional Specifications
- Hour Meter Crew Boss
- Model Number 53RI8CSU050
Warranty
- Residential Warranty 3-Year / No Hour Limit Warranty and/or 5-Year 1,200 Hour
Disclaimers
- Specifications Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
- Hosepower *As required by Kawasaki, horsepower tested in accordance with SAE J1995 and rated in accordance with SAE J2723 and certified by SAE International.
Model | Manual | Form Number | |
|---|---|---|---|
| 53RI8CSU050 | MANL:OPER:53A:STANDING:RIDER | ||
| MANL:OPER:53A:STANDING:RIDER | 769-26725 | Download | |
| MANL:OPER:53A:STANDING:RIDER | 769-26894 | Download | |
| MANL:OPER:53A:STANDING:RIDER | 769-26935 | Download | |
| SHEET:SUP:BILING:EPA:EVP:22-23 | 769-26607 | Download | |
| SHEET:SUP:Updated_Warranty | 769-26898 | Download |