Special Financing Offer – 0% for 36 months! Learn More
3X™ 30 HD TRAC
3X THREE-STAGE POWER
Item#:
31AH7EVZ596
Dealer Delivery
$ 2,899.00
Dealer Delivery
3X™ 30 HD TRAC
3X THREE-STAGE POWER
Item#:
31AH7EVZ596
$ 2,899.00
Superior Quality that Handles Winter’s Worst
The award-winning 3X is the powerhouse of the X Series line. With a patented three-stage system, the 3X clears deep snowfall up to 50% faster than a traditional snow blower. That means you can easily and quickly remove 18 inches of snowfall at a comfortable pace. It will even bust through the wall of winter at the end of the driveway. When you have 3X strength, nothing is in your way.
Documents and Guides
- 420cc OHV Engine is powerful, dependable and equipped with push-button electric start
- 30 inch clearing width and 23 inch intake height
- Track drive system creates 50 percent more ground contact for added stability and traction in heavy snow and ice
- LED lightbar with Dual LED headlights for greater visibility in low-light conditions
Attachments & Accessories
3X™ 30 HD TRAC Features
Unbeatable 3-Stage Power
The induction accelerator pulls more snow, ice, and slush through the system like a turbocharger, which is ideal for busting through the wall of winter at the end of the driveway.
Heavy-duty Gearbox
Cast aluminum auger gearbox protects auger gears for maximum durability and the increased intake height of 23'' allows you to take on the highest snow.
Track Drive
Adjusting track drive allows for three levels of operating depending on snow conditions and surface type, giving you peace of mind on slopes and inclines.
Built for the Long Haul
Get long-lasting durability with no maintenance requirements from the cast aluminum gearbox, backed by a 5-year limited gearbox warranty.
Power Steering
With just one finger, you can engage the power steering giving you unmatched control, effortless maneuverability and single-hand operation.
Push Button Electric Start
A large 4-cycle Cub Cadet engine gives you more power. And it all starts with the push of a button.
Cool Blue Skid Shoes
Make handling and maneuvering easy by gliding over surfaces. Won't rust or damage driveways, sidewalks, or garage floors.
Comfortable Handling
Heated hand grips ensure a comfortable command in even the coldest conditions.
Powerful Illumination
See clearly at dawn or dusk with dual LED headlights that shine brighter and farther than competitor models.
Work Longer
Work before dawn or after dark with dual LED headlights.
More Intake
A 23-inch intake height allows you to clear snow more efficiently.
Break Through Snow
Drift cutters allow you to break through tightly packed snow.
Canadian Commitment
When you buy Cub Cadet you're backed by our Canadian Advantage, which includes outdoor power equipment that is engineered and tested in Canada, bilingual customer service support, and a nationwide network of 1,100 Service Dealers.
Specs & Maintenance
Engine
- Engine Brand Cub Cadet® OHV
- Engine Displacement 420cc
- Starter Type Push Button Electric Start (110 volt)
- Fuel Tank Capacity 5 quarts US / 4.7 L
Drive System
- Drive System Steerable drive system
Warranty
- Auger Gearbox Warranty 5-year gearbox
- Warranty 3-year residential
- Commercial Warranty 1-year commercial
Controls
- Handle Grip(s) Heated Hand Grips
- Single-Hand Operation Standard / clutch lock
- Tread D-track design
Power and Performance
- Clearing Width 30"
- Intake Height 23"
- Auger Gear Box Heavy-duty cast aluminum
- Number of Stages 3X Three Stage
Dimensions
- Auger Diameter 12"
- Impeller Diameter 12"
Additional Specifications
- Headlight(s) Dual in-dash LED + Light Bar on Housing
- Shave Plate Steel
- Skid Shoes Cool Blue™ rust resistant, non-marking, reversible
- Drift Cutters Heavy-duty slotted, tool-less
- Oil Fill Tube Extended
- Auger Material Heavy-duty serrated steel
- Chute Material 5" heavy-duty steel
- Model Number 31AH7EVZ596
Shave Plate Specifications
- Auger Housing Width 30"
Disclaimer
- Specifications Disclaimer Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
Deluxe Snow Thrower Cab Installation
TRICKS AND TIPS
Protect yourself from the elements while you are clearing your driveway with a snow thrower cab. Follow these simple step for installing your cab on your Cub Cadet Two-Stage snow thrower.
How to Prepare Your Snow Blower for Storage in the Off-Season
MAINTENANCE
Learn how to properly retire your snow thrower for the season with these helpful snow blower storage and maintenance ideas from Cub Cadet.
How to Prepare Your Snow Blower for Winter
MAINTENANCE
Prepare your snow blower for use this winter with snow thrower maintenance tips from Cub Cadet. Our snow blower tips will help ensure your machine is
Maintenance Schedule & Tips
MAINTENANCE
Keep your snow blower in good condition with snow thrower maintenance from Cub Cadet. Proper snow thrower maintenance is essential when you're
Recommended Snow Thrower Back-Up Parts
TRICKS AND TIPS
Learn how to replace your Cub Cadet walk-behind lawn mower wheel with this simple five-step guide.
Snow Thrower Safety Tips
SAFETY
Use a snow blower or snow thrower to keep your paved drive and walkways snow-free during the winter months. With snowblower safety tips and operation advice from Cub Cadet, you'll have your driveway cleared of snow in no
Model | Manual | Form Number | |
|---|---|---|---|
| 31AH7EVZ596 | MAN:OWNR: Comb 700_ENG_FRENCH_ | ||
| MAN:OWNR: Comb 700_ENG_FRENCH_ | 769-12277 | Download | |
| MAN:OWNR:ENGINE 277,357_420 EN | 769-11675A | Download | |
| MAN:OWNR:ENGINE_357_420 ENG_FR | 769-15431 | Download | |
| MANL:OPER:BILING:31X:700:US_CA | 769-24890 | Download | |
| MANL:OPER:BILING:31X:7XX_CAN | 769-16890 | Download | |
| MANL:OPER:BILING:31X:7XX_CAN | 769-22283 | Download | |
| MANL:OPER:BILING:MTD ENG:357/4 | 769-25490 | Download | |
| SHEET:SUP:31X2X-3X:CUB:US_CA | 769-24534 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EXH: | 769-15393 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EXH: | 769-17172 | Download | |
| SHEET:SUP:BILING:EPA:CARB:EXH: | 769-23593 | Download | |
| SHEET:SUP:BILING:EPA:EVP:06301 | 769-15392 | Download | |
| SHEET:SUP:BILING:EPA:EVP:18-19 | 769-17171 | Download | |
| SHEET:SUP:BILING:EPA:EVP:18-19 | 769-23590 | Download | |
| SHEET:SUPP:WARR/PARTS:CUB TRAC | 769-16930 | Download | |
| SHEET:SUPP:WARR/PARTS:CUB TRAC | 769-22294 | Download |
Product Reviews
Rated 5 out of
5
by
Dk77 from
Huge power!
Purchased this fall and just had the chance to use this for our first snow storm of 2019. We received 50cm of snow. This Cub is even more than I expected. I intentionally attempted to push it to its limits and run it through every senario I could think of and it didn’t hesitate once. Deep powder, heavy snowplow piles, salted heavy slush and frozen snow piles the day after the storm and this thing didn’t hesitate once. The Cub Cadet replaced my 25 year old Ariens 2 stage 30” snowblower that was also an awesome machine. But hands down this thing is twice the machine. It’s a beast!
Date published: 2019-01-21
Rated 5 out of
5
by
Lexicon303 from
Unbelievable piece of equipment!
Purchased the 30 inch 3x with tracks. Using in North Dakota.I try to give the best actual use reviews that i can good and bad. Lets start at the top. The controls are great, the hand controls these are larger, if you have small hands it may pose a small issue, but, the levers are not hard to press down either. When moving forward with the auger on you can take your hand off of the auger control for one handed use this is good to have sometimes personally I don't use it much. The triggers for the zero turn capability are great and the feature works great, although, it seems to be easier for me to just move the machine by my own power, getting the blower to move quickly with this feature would mean stopping and switching to one of the faster gears to turn around fast. The Chute worm drive works great, on a few occasions i have had the cables that run over the chute gear box hang up on that box and i have to move them off or it wont turn, not a big deal. the lever controlling the chutes directional out put, great no problems. One thing i didn't understand is that the all metal chute sits on a polymer base, glass filled plastic i guess? I would have preferred steel paying 2k for a machine you would think they wouldn't cheap out on that. Heating hand grips get toasty enough, if you have big gloves and its 40 below then they are ok. The gear speeds are what you would expect although R1 is basically useless, but, that has been my experience with all blowers, just go right to R2, 6 is perfect for top end fast. The engine on the machine is impeccable, the thing is a monster, it seems like the more load you give it the more it wants to throw snow even farther...wow. it holds a TON of gas too, which i love, and its pretty quiet in my opinion for a 420cc engine. As we move down you have the height adjustment, transport, gravel, packed etc. This feature works great and they really thought about the settings i think, they are great for each application, although you will likely use them for something other than what is marked. The lever on the adjustment can be pretty hard to move for a smaller person though. On to the Tracks, these things are great, i have to blow out tons of snow out of my yard and sometimes you run up on snow pack, wheels dig in and you are stuck, the tracks just keep on moving love this feature. The tracks will slip, internally, when they are wet or slightly icy or if you are trying to go forward or back and you are decently stuck, not my favorite, hasnt stopped me but i would prefer to not have to put extra wear on that part. The 30 inch cut is what it is, 30 inches, the fact that the engine and the auger will handle anything you stuff in there is what really sells me. it throws and throws and doesn't quit. The 3 stage auger itself, great feature, the machine draws snow much better than a traditional cheap dollar snowblower. The LED lights on the unit are great, you get a great spread of light and its bright. The material the unit will throw. if you have deep light powdery snow, it just fun to use. The blower cuts through that stuff like it isnt even there and tosses it a like 40 feet. Heavier snow that is slightly wet, it seems to throw just as far, the only issue here is that the traction is so good that you start to push a snow-pack out in front of you and you end up stopping, maybe that is user error but it happens to me sometimes. Heavy wet snow, even with this the blower throws it probably 10 or so feet but it throws. Watery Slushy snow, you will find that it just comes out of the Chute 3 or 4 feet but generally does not just fall out the Chute all over the side of the blower. Deep snow, if it is light powdery snow, i have run several inches over the top of the blower and it will just make itself a tunnel and keep going anything after light and fluffy you slow down more and more and may have to even break up the snow in front if its really bad.
All in all, this is a Titan in the walk behind class of blowers. If you have the money to spend...SPEND IT! You won't be disappointed. Just looking at this piece of equipment and the craftsmanship, you can tell it will last a very long time. A+ Cub Cadet!
Date published: 2019-03-19
Rated 2 out of
5
by
DoninPA from
Expected more
I bought the 3X 30 inch track to replace a 25 year old snow blower and finally got to use
It today. Started easily enough and steering was a little rough but I’ll get used to that. Snow today was only about three to four inches and very light and fluffy. My 25 year old snow blower would have sent this snow 30-40 feet. This new top end one only sent it about 10-12 feet. Again this was light and fluffy. So because I have a wide driveway I have to blow snow twice. I can’t imagine what will happen when we get wet heavy stuff. I’m really worried.
On the other hand the Tracks worked great going up the steady incline of my driveway.
For the price I paid for this I expected more!
Date published: 2020-01-08
Rated 4 out of
5
by
Murice from
It's a work horse in the snow
I have only had snowblower for a few months but I've used it twice once in a 20inch snow storm and the other in a 6inch snow storm. Performance was great or just wants more snow. The only thing I would suggest cub cadet make sure customers purchase plenty of shear pins at the time on purchasing snowblower. Heavy snow will cause them to break it seems every use. But great snowblower.
Date published: 2019-02-16
Rated 2 out of
5
by
Disappointed too from
Disappointed, happy for 3 year warranty!
[This review was collected as part of a promotion.] Bought this last year (Dec 2019) and loved it.
The first time we used it this year the drive sprocket on both tracks broke. Leaving it unable to move. We were shocked that they were made out of plastic. There is another review purchased the same month that had the same problem. The repair man said it was not common. We wonder if
the plastic was defective at that time.
Luckily it was still under warranty and we were able to get it repaired at no cost.
We will keep an eye on it for any cracking this year. Perhaps we should have purchased the model with wheels.
Date published: 2020-12-20
Rated 5 out of
5
by
TakeHeart from
4th Time Lucky
This Cub Cadet 3X 30” HDT is our 4th snow blower over 26 years. Will compare it based on our experience – so far am pleased in clearing our 200 foot laneway – but not much snow yet to move with it. (We often have drifts 5 feet deep.)
- Our first machine was an older 1980’s 24” Ariens (used). Had difficulty in clearing the lane as engine was old and problematic, also not capable of deep snow.
- Second was 1990’s John Deere 27” TRS heavy unit. Worked well, but twice destroyed the Tecumseh Snow King 8 to 10 HP engine, would accelerate until “bang” and a $1000 repair bill. Newer JD machines are not as heavy weight.
- Third unit was MTD – Gold 28”. Seemed too light to cut into heavy snow, and snow had to be cut up by shovel into bite sized pieces before blower could move it (but then worked fine), although it needed to be pushed a lot in heavy snow as tires would spin.
- After 5 years with MTD-Gold Machine, bought the heavy duty track drive Cub Cadet 3X 30” HDT. Things I like:
o Heavy unit should hopefully stand up.
o Track Drive was well spoken of by dealer. Tried it on wet, packed snow about 12” deep along side of laneway, and machine cut into it, and blew it perhaps 10 feet. Older MTD-Gold had been unable to touch this heavy stuff.
o Larger steel chute did not plug when blowing wet snow, while older MTD-Gold plastic chute chronically would plug in wet snow.
o Hand warmers work well.
o Three headlights (two on control panel and one on auger body) are not blocked by chute, and worked well to illuminate job.
o So far, the speed selector seems to work well, and 2nd speed seems reasonable for heavy snow. MTD 2nd gear would often spill snow out the sides.
o The adjustable auger height lever seems to work well to keep auger opening slightly above surface, so will hopefully prevent drawing in rocks, or hitting on irregular laneway surfaces.
Date published: 2018-12-16
Rated 4 out of
5
by
MVSailor from
Performed well after 1st 7" snowfall
I brought this unit home one day before our first snow, which was a 6-7" one that was wet (tree limbs bent down). The 3x 30 Trac started up flawlessly and had no problems at all removing the heavy snow. The real test was the pile at the end of the drive the plows left. It was very wet and about 14" deep. Blew right through it. The 3 stage does seem to work as advertised. Also, the tank treads just drove through that mess with no issues. The throwing distance wasn't bad, and considering it was a wet snow, did pretty good. The power steering worked very well and is a necessity with tank treads. I only had 2 items I could snipe about.
1. The hand heaters, for an outside machine, were not that hot. My truck steering wheel gets warmer. It would be nice if those went up a notch or two hotter. However, they did heat up and they will be appreciated in the sub zero sessions.
2. The chute pitch adjust to raise and lower the chute exit would not go to the highest setting. I may have to fiddle with the tension on the flange nut there so it will be loose enough to adjust the full range but not so loose it flops around.
In summary, I am very happy with it after one medium grade test. I think this will perform well for many years.
Date published: 2017-12-15
Rated 5 out of
5
by
Cook from
Perfect
This was the best purchase that I have made ever. I love my Cub 30 3 stage here in Colorado. DO NOT hesitate to get this blower. Thank your team for building such a fine product.
Date published: 2019-03-04