PRO Z 972 S KW
PRO Z 900 S SERIES
Item#:
53FIHMUY050
From
$ 24,199.00
MSRP
PRO Z 972 S KW
PRO Z 900 S SERIES
Item#:
53FIHMUY050
From
$ 24,199.00
MSRP
- 35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission
- 72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
- 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty
You're shopping available inventory from
Attachments & Accessories
PRO Z 972 S KW Features
Specs & Maintenance
Engine
- Engine Brand Kawasaki®
- Engine Model FX Series
- Engine Model Number 1000V
- Engine Displacement 999cc
- Engine Output 35HP
- Fuel Tank Capacity Dual 7.45 gal. US (28.2 L)
- Cylinders Twin
- Engine Start Ignition Key
- Engine Oil Capacity 2.0 qt. US (1.89 L)
- Lubrication Fully pressurized
- Charging System 15 amp regulated
- Fuel Gauge Electronic
- Choke Separate Choke
- Air Filter High Density
- Oil Filter Yes
- Fuel Delivery Carburetor
Drive System
- Transmission Parker HTG 16cc pump / 310cc wheel motor
- Forward Speed 14 mph / 22.5 km/h
- Reverse Speed 6 mph / 9.5 km/h
Cutting Deck
- Deck Cutting Width 72 in
- Deck Material fabricated 7ga. (.187”) steel shell
- Deck Engagement (PTO) electronic fingertip engagement
- Deck Construction 7ga. top plate 7ga. bottom reinforcement ¼” rolled leading edge
- Spindle Construction 8" sealed cast aluminum housing (maintenance-free)
- Blade(s) Triple-blade / High-lift blade (standard) Marbain Blade
- Cutting Height Range 1” to 5” in 1/4” increments
- Anti-Scalping 4 front deck gauge wheels
- Deck Positions Foot pedal with spring assist 16 Positions
Warranty
- Warranty 3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
- Deck Shell Warranty 5 year / 1,750 hour limited deck construction warranty
- Commercial Warranty 3 year / no hour limit commercial warranty
Chassis
- Frame Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots
- Front Axle 2" x 3" solid axle tube with ISO dampening suspension
- ROPS 2" x 2" spring-latch tool-less foldable 3 position
- Bumper 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
- Yokes 1/2" thick steel front yokes
Controls
- Cruise Control NA
Comfort
- Seat Type High-back Air-Ride suspension with EVC cushion, seat belt
- Armrests Padded arm rests
- Seat Suspension ISO mounted base (lateral suspension)
- Seat Adjustment Angle back adjust and lumbar support
Wheels
- Rear Tires 26"x12"-12"
- Front Tires 16"x6.5"-8"Kenda K505
- Tire Tread Turf Tread
Dimensions
- Dimensions L/W/H 88" L x 85" W x 52" H
- Weight (approx.) 1631 lbs.
Additional Specifications
- Hour Meter Crew Boss
- Discharge Chute High-density, impact-resistant rubber
- Cup Holder Intergrated into Side Pod
- Model Number 53FIHMUY050
Disclaimers
- Specifications Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
Model | Manual | Form Number | |
|---|---|---|---|
| 53FIHMUY050 | MANL:OPER:ENGL:PRO Z XXXS | ||
| MANL:OPER:ENGL:PRO Z XXXS | 769-26331A | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (18) | 769-12364 | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (18) | 769-12364A | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795 | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795A | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795B | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795C | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795D | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795E | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795F | Download | |
| MANL:OPER:ENGL:PRO Z XXXS (19) | 769-26331 | Download | |
| MANL:OPER:FRENCH:PRO Z XXXS (19) | 769-17795_FR | Download | |
| SHEET:SUP:BILING:EPA:EVP:06301 | 769-15171 | Download | |
| SHEET:SUP:BILING:EPA:EVP:18-19 | 769-17171 | Download | |
| SHEET:SUP:BILING:EPA:EVP:18-19 | 769-23590 | Download | |
| SHEET:SUP:BILING:EPA:EVP:20-21 | 769-25879 | Download | |
| SHEET:SUP:BILING:EPA:EVP:21-22 | 769-26272 | Download | |
| SHEET:SUP:BILING:EPA:EVP:22-23 | 769-26607 | Download |
Product Reviews
Rated 5 out of
5
by
CCS Facilities Director from
Great Machine!
I purchased this mower last fall. It is used for a K-12 school with 25 acres to mow. It handles our terrain with ease and has saved us quite a bit of mowing time over our other mowers. The striping looks great and the rugged design has held up throughout our entire mowing season. The steering wheel makes mowing our hills and difficult areas a breeze even when the conditions are less than ideal.
Date published: 2019-09-05
Rated 5 out of
5
by
JAE2009 from
Easy to mow. I like all the features.
I bought the mower a month ago and would not change to any other type. I enjoy mowing and riding my mower
Date published: 2020-06-28
Rated 5 out of
5
by
the1rick89 from
Mowing Perfection!
For those who mow a LOT, I'll get right to the point... this mower is built like a tank, and drives like a sports car!
Date published: 2020-08-08
Rated 5 out of
5
by
Jacobsen from
Love this mower!
[This review was collected as part of a promotion.] I love my cub 972 s! You just can’t beat the hill side stability and the way this thing handles. When making turns at full lock it turns the inner wheel in reverse to leave virtually no turf tear! I mow my 10 acres in about 3 hours with hills and culverts out front and a pond with a dam in the rear of my property with ease. My only desirable add would be an efi motor option. Otherwise I love this thing!
Date published: 2021-11-14