PRO Z 554 S KW
PRO Z 500 S SERIES
Item#:
53TIHJUN050
$ 16,599.00
PRO Z 554 S KW
PRO Z 500 S SERIES
Item#:
53TIHJUN050
$ 16,599.00
- 27 HP Kawasaki FX850v (852cc) engine and 12cc Parker HTJ transmission
- 54” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
- 3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty
Specs & Maintenance
Engine
- Engine Brand Kawasaki®
- Engine Model FX Series
- Engine Model Number 850V
- Engine Displacement 852cc
- Engine Output 27HP
- Fuel Tank Capacity Dual 7.45 gal. US (28.2 L)
- Cylinders Twin
- Engine Start Ignition Key
- Engine Oil Capacity 2.0 qt. US (1.89 L)
- Lubrication Fully pressurized
- Charging System 15 amp regulated
- Fuel Gauge Dial
- Choke Separate Choke
- Air Filter High Density
- Oil Filter Yes
- Fuel Delivery Carburetor
Drive System
- Transmission Parker HTJ Series, 12cc pump / 260cc wheel motor
- Forward Speed 10 mph / 16 km/h
- Reverse Speed 5 mph / 8km/h
Cutting Deck
- Deck Cutting Width 54 in
- Deck Material fabricated 7ga. (.187”) steel shell
- Deck Engagement (PTO) electronic fingertip engagement pto
- Deck Construction 7ga. top plate 7ga. bottom reinforcement ¼” rolled leading edge
- Spindle Construction 8" sealed cast aluminum housing (maintenance-free)
- Blade(s) 3 high-lift Marbain® blades / 18,500 fpm (approx.)
- Cutting Height Range 1” to 5” in 1/4” increments
- Anti-Scalping 2 front deck gauge wheels
- Deck Positions Foot pedal with spring assist 16 Positions
Warranty
- Warranty 3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty
- Deck Shell Warranty 5 year / 1,750 hour limited deck construction warranty
- Commercial Warranty 3 year / no hour limit commercial warranty
Chassis
- Frame Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots
- Front Axle 2" x 3" solid axle tube
- ROPS 2" x 2" spring-latch tool-less foldable 3 position
- Bumper 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
- Yokes 1/2" thick steel front yokes
Controls
- Cruise Control NA
- Brakes Hand-operated lever with integrated hydro pump release lever
- Steering Control High Performance Steering Wheel with electronic power steering & Foot-pedal Control
Comfort
- Seat Type Cushion with seat belt
- Armrests Standard
- Seat Suspension High-back dial suspension with EVC
- Seat Adjustment angle back adjust
Wheels
- Rear Tires 24"x12"-12"
- Front Tires 15"x6"-6"Kenda K505
- Tire Tread Turf Tread
Dimensions
- Dimensions L/W/H 84" L x 56" W x 50" H
- Weight (approx.) 1424 lbs.
Additional Specifications
- Hour Meter Crew Boss
- Discharge Chute High-density, impact-resistant rubber
- Cup Holder Intergrated into Side Pod
- Model Number 53TIHJUN050
Disclaimer
- Specifications Disclaimer Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
Model | Manual | Form Number | |
---|---|---|---|
53TIHJUN050 | MANL:OPER:ENGL:PRO Z XXXS (18) | ||
MANL:OPER:ENGL:PRO Z XXXS (18) | 769-12364 | Download | |
MANL:OPER:ENGL:PRO Z XXXS (18) | 769-12364A | Download | |
MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795 | Download | |
MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795A | Download | |
MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795B | Download | |
MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795C | Download | |
MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795D | Download | |
MANL:OPER:ENGL:PRO Z XXXS (19) | 769-17795E | Download | |
MANL:OPER:FRENCH:PRO Z XXXS | 769-17795_FR | Download | |
SHEET:SUP:BILING:EPA:EVP:06301 | 769-15171 | Download | |
SHEET:SUP:BILING:EPA:EVP:18-19 | 769-17171 | Download | |
SHEET:SUP:BILING:EPA:EVP:18-19 | 769-23590 | Download | |
SHEET:SUP:BILING:EPA:EVP:20-21 | 769-25879 | Download |
Product Reviews
Rated 4 out of
5
by
cub4gum from
Good not great
I've had my 554 now for 10 days and nearly 20 hours of mowing. The thing is built like a tank and mows grass very well--tall or short. One thing I'm going to fabricate and install is a rub bar for the fuel tanks. With a 54 inch deck(the widest one I can use because of the many trees I mow around) the fuel tanks are too close to the outside of the machine and tend to rub against anything if the mower is tilted in. I'm sure a 60 inch deck would cure this problem, but that is not an option for me. The Kawasaki motor seems to have plenty of power( though it does like its fuel, my biggest problem here is my previous mower had a very efficient diesel motor). I'm hoping by moving up to a commercial model this mower will not self destruct after 3-4 years and 400 hours.
Date published: 2017-05-17
Rated 5 out of
5
by
ssgf from
Excellent cut and performance
I've had my Pro z for about a month, and I wish I would have bought it sooner! Unbelievable cut quality and the performance on hills and slopes is unmatched. I've been able to expand my lawn into areas that previously could not be cut with a zero turn. Overall, very impressed-I don't think you'll be disappointed. The steering wheel is not a fast as a lap bar if you have tight areas--but the comfort and performance on hills makes up for that difference.
Date published: 2019-06-15
Rated 5 out of
5
by
always busy from
mowed about 14 hours
one thing I don't like about is the way you have to check hydraulic fluid it would been better to have tank so you could add and check fluids there
Date published: 2020-07-26
Rated 4 out of
5
by
Smooth Cuts lawncare from
Great mower!
[This review was collected as part of a promotion.] I bought this model for several reasons, I ran JD tractor mowers for a long time and wanted to be able to cover more ground than my tractor would. Other than a few issues it was one of the best investment's I did. It would mow as fast as any other zero turns and I could mow side hill's better than my tractors and I had some fairly steep side hill's. The only major issue was when I traded it off here in Florida I found out that one of the hydro motors was leaking. Not a cheap fix but wish I would have kept it and not bought a new Kubota zero turn. Nothing but headaches since I bought it. 68 hrs, already has a new motor and now it's still in the shop, been there for over 7weeks. 3 months total since buying it. I would strongly recommend the Cub Cadet ( steering wheel) zero turn over any joystick zero turns. Owned it for over 3 1/2 years and never got stuck and I mowed some pretty hairy places. Great mower!
Date published: 2021-02-16