PRO Z 760 S
PRO Z 700 S SERIES
Item#:
53FIHTUV050
From
$ 21,999.00
MSRP
PRO Z 760 S
PRO Z 700 S SERIES
Item#:
53FIHTUV050
- 31 HP Kawasaki FX921v (999cc) engine and 12cc Hydro-Gear 4400 transmission
- 60” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements
- 3-Year / no hour limit warranty and/or 5-Year 1,200 hour warranty
You're shopping available inventory from
PRO Z 760 S Features
Specs & Maintenance
Engine
- Engine Brand Kawasaki®
- Engine Model FX Series
- Engine Model Number 921v
- Engine Displacement 999cc
- Engine Output 31 HP
- Fuel Tank Capacity Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge
- Lubrication Full - Spin On
- Choke Separate Choke
Drive System
- Transmission 12cc Hydro-Gear 4400
- Forward Speed 12 mph / 19 km/h
- Reverse Speed 6 mph / 9.5 km/h
Cutting Deck
- Deck Cutting Width 60 in
- Deck Material fabricated 7ga. (.187”) steel shell
- Deck Engagement (PTO) electronic fingertip engagement pto
- Deck Construction 7ga. top plate 7ga. bottom reinforcement ¼” rolled leading edge
- Spindle Construction 8" sealed cast aluminum housing (maintenance-free)
- Blade(s) Triple-blade / High-lift blade (standard) Marbain Blade
- Cutting Height Range 1” to 5” in 1/4” increments
- Anti-Scalping 2 front deck gauge wheels
- Deck Positions Foot pedal with spring assist 16 Positions
Chassis
- Frame Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots
- Front Axle 2" x 3" solid axle tube with ISO dampening suspension
- ROPS 2" x 2" spring-latch tool-less foldable 3 position
- Bumper 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch
- Front Caster Yokes 1/2" thick steel front yokes
Controls
- Cruise Control NA
- Brakes Hand-operated lever with integrated hydro pump release lever
- Steering Control High Performance Steering Wheel with electronic power steering & Foot-pedal Control
Comfort
- Armrests padded arm rests
- Seat Suspension High-back dial suspension with EVC cushion, ISO mounted base (lateral suspension)
- Seat Adjustment Angle back adjust and lumbar support
Wheels
- Rear Tires 24"x12"-12"
- Front Tires 16"x6.5"-8"Kenda K505
- Tire Tread Turf Tread
Dimensions
- Weight (approx.) 1562 lbs.
Additional Specifications
- Hour Meter Crew Boss
- Discharge Chute High-density, impact-resistant rubber
- Cup Holder Intergrated into Side Pod
- Model Number 53FIHTUV050
Warranty
- Residential Warranty 3-Year / No Hour Limit Warranty and/or 5-Year 1,200 Hour
- Commercial Warranty 3-Year / No Hour Limit Warranty and/or 5-Year 1,200 Hour
Disclaimers
- Specifications Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
- Horsepower *As required by Kawasaki, horsepower tested in accordance with SAE J1995 and rated in accordance with SAE J2723 and certified by SAE International.
Product Reviews
Rated 3 out of
5
by
Doc59 from
Pro Z 700 S
[This review was collected as part of a promotion.] The mower is a tank well constructed for sure. The steering wheel gives great control on slopes sideward motion going forward. Now the cons: I have two knee implants, try holding your foot down for couple of hrs. and your foot starts sliding into the reverse pedal 2" next to the foot pedal inside forward. That's one issue. The second is going downhill gentle slope and the mower thinks you on a race track with your foot off the pedal. You grab the hand brake trying to slow it down as it slides forward with turf tires. It's a problem believe me. The deck raising it or lowering it with your left leg artificial knee becomes a challenge. Yes, I agree with another reviewer; Hey fellows, think about adding a foot brake or like would help. Yes, electric motor for the heavy deck as well.
Date published: 2025-07-03